| Tab Materials | SPCC |
|---|---|
| Connector Series | EV |
| Nickel Plated | THICKNESS 3~5μm |
| Surface Treatment | Electroless Nickel Plating |
| Application | Electric Vehicle Charging |
| Insulation Resistance | 1000MΩ @ 1000VDC |
|---|---|
| Rated Current | 50A |
| Pin Material | SUH446+Cu |
| Thickness | 3-5μm |
| Working Press | 3.5MPa |
| Rubber Material | Silicone Rubber |
|---|---|
| Temperature Range | -40℃~+150℃ |
| Insulationresistance | ≥1000 MΩ |
| Model | EV Connector |
| Ceramic Materials | 95% AL2O3 |
| Insulation | 500MΩ @ 500VDC |
|---|---|
| Pins Materials | SUH446 WITH COPPER CORED, RATIO 2:1 |
| Type | Electric Vehicle Connector |
| Nicke Plated | THICKNESS 2~4μm |
| Rated Voltage | 1000VDC |
| Product Type | Electric Vehicle Connector |
|---|---|
| Pins Materials | 4J28 OR SUH446 STAINLESS STEEL |
| Thickness | 2~5 μm |
| Ceramic Number | 6 |
| Working Temperature | -40°C ~ +150°C |
| Temperaturerange | -40°C To150°C |
|---|---|
| Operation Current | 25A |
| Application | Used For EV Charging Stations And Electric Vehicles |
| Plate | #45 STEEL |
| Type | Electric Vehicle Connector |
| Rated Current | 30A |
|---|---|
| Sealing Method | Hermetic Seal |
| Nickel Plated | THICKNESS ≥1μm EXCEPT TABS |
| Insulator Material | Glass |
| Type | Electric Vehicle Connector |
| Nicke Plated | THICKNESS 2~4μm EXCEPT TABS |
|---|---|
| Application | Electric Vehicle Charging |
| Connector Series | EV |
| Pin Number | 3 |
| insulating material | Glass |
| Sleeve Hardness | HA 50-55 |
|---|---|
| Dielectric Strength | 3000VAC |
| Plate | 45 Steel |
| Product Type | Electric Vehicle Connector |
| Insulation Material | Glass And Ceramic |
| Insulator Material | Glass And Ceramic |
|---|---|
| Operating Temperature | -70°C To +300°C |
| Material | Hermetic Seal |
| Thickness | 3~5 μm |
| Pins | SUH446 STAINLESS STEEL |
