| Hermeticity | 1x10^-8 Atm Cc/sec He |
|---|---|
| Number Of Pins | 1 |
| Insulation Resistance | 10^14 Ohms |
| Body | 304 STAINLESS STEEL |
| Manufacturer | SSCore |
| Housing Material | 304 STAINLESS STEEL |
|---|---|
| Contact Resistance | 10 MΩ |
| Sealing Method | Glass To Metal Seal |
| Connector Type | Single Pin |
| Thermal Cycle | -60°C ~ +100°C |
| Temperature Range | -40°C To +150°C |
|---|---|
| High Voltage Resistance | ≥2000VAC, Leakage Current ≤0.5mA |
| Glass Materials | ELAN #48 |
| Tab Materials | SPC |
| Tab Number | 2 |
| Rohs Compliant | Yes |
|---|---|
| Glass | Coring 9013 |
| Pin | 4J50 ALLOY |
| Mechanicalstrength | High Tensile And Compressive Strength |
| Leak Test | Less Than 1X10^-8 Mbr.l/s AT 1 ATM. |
| 밀봉 방법 | 유리-금속 |
|---|---|
| 전압 등급 | 1000 Vac |
| 높은 실링 성능 | 4.0MPA는 누출되지 않습니다 |
| 핵심 칼럼 | M4 |
| 연결기 배향 | 일직선 |
| 접속구의 형태 | 피드스루 |
|---|---|
| 접촉물질 | 구리 |
| 하우징 소재 | 스테인리스 스틸 |
| 와이어 게이지 | 20-28AWG |
| 연결기 배향 | 똑바로, 직각 |
| Body Material | 06Cr19Ni10 |
|---|---|
| Thermalexpansioncoefficient | Matched Between Glass And Metal |
| Stress-resistant | 1.0MPa |
| Pin Materials | 4J50 |
| Contact Resistance | 1000 MΩ |
| Sealing Method | Glass-to-Metal Or Ceramic-to-Metal |
|---|---|
| Cable Length | Customizable |
| Dielectric Withstanding Voltage | 1,500 VAC |
| Mounting Style | Flange, Threaded, Weldable |
| Insulation Material | Glass Or Ceramic |
| Insulation Material | PTFE/Teflon |
|---|---|
| Pressure Range | Vacuum To 10,000 Psi |
| Hermetic Seal Type | Glass-to-Metal |
| Hermeticity | 1x10^-8 Atm Cc/sec He |
| Operating Temperature | -55°C To +200°C |
| Body Finish | Nickel Plated |
|---|---|
| Pin | 4J50 ALLOY |
| Pin Finish | Glod Plated |
| Application | Vacuum Tubes, Sensors, Electronic Devices |
| Connector Type | 10 Pin Feedthrough |
